超精确，超灵敏，超可靠的

Ultra accurate,ultra adaptable,ultra reliableteopto
对射光束一体的槽型光电传感器可设计到任何流水线上生产过程。无需校准问题，无易脆的玻璃光纤那样复杂性。其坚固耐用的特点和内置的可靠性使其满足苛刻要求的应用，如部分位置控制，边缘检测，夹具位置控制，工件脱模，托盘搬移，自动拾取放置，及出错保护等场合。

Teopto self-contained thru-beam sensors are designed to streamline any production process. No more alignment problems, fragile installations, and fiber optic complexity. Their rugged features and built-in reliability make them a natural to meet demanding applications such as part positioning, edge detection, gripper positioning, parts ejection, pallet transfer, pick and place, and Poka-Yoke.

快速配置并运行
这些传感器安装迅速，它们是单体设计制造的,光束对射精确对准形成闭合光路，单条电缆线即可工作，没有像玻璃光纤线和放大器分开安装那样复杂。

Get up and running fast

These sensors install in no time. Their one-piece design makes them a snap to precisely target whatever aspect of the process is necessary. One cable does the job. No multiple fiber optic cables and separate amplifers are needed to complicate the installation

适应性
这些传感器能探测不论什么颜色、形状，及反射率高的目标,长年使用。

Flexible
These sensors detect virtually any target regardless of color, shape, or reflectivity with high repeatability year after year.

Choose your level of accuracy.
Visible red emission models have detection resolution down to 0.3 mm. Smaller gap class II laser versions boast resolution down to 0.06 mm throughout their beam.
耐用性
这些传感器几乎不需要维护,在正常情况下,不偏离校正。
耐用型可用于极其恶劣的环境中。

Reliable
These sensors need virtually no maintenance. Under normal conditions, they never go out of adjustment. Heavy duty versions are available for
extremely harsh environments.

Why use a thru-beam sensor?

The advantages of thru-beams…

能容易检测出小零件

Able to detect small parts with ease

能适应极其恶劣的环境.

Extremely tolerant of dirty environments

完全不受目标颜色，反射或表面状态的影响

Completely immune to target color, reflectivity or surface condition

往复非接触地感应的方式

Most repeatable non-contact sensing mode

当涉及到可靠性和准确性时,对射光束感应要优与其他光感应模式.其可靠性是直射而获取超增益的结果,超增益的测量,高光能量的对准使感应稳定正常.这样的传感器耐灰尘、湿气、碎屑在其表面上。

When it comes to reliability and accuracy, there is no optical sensing mode better than thru-beam sensing. Their reliability is a result of the extraordinary levels of excess gain. Excess gain is the measurement of light energy above the level required for normal sensing. The more excess gain a sensor has, the more tolerant it is of dirt, moisture and debris accumulating on the sensor.

这个精度是对射光束的因素,定义明确了感应区域，这个区域称为有效的光束，尺寸取决发射器和接收器透镜的大小，由于检测目标遮断一部分光束，透镜很小，有效光束也很细，传感器就能获取很高精确度。

The accuracy of thru-beams result from a tightly, well-defined sensing area. This area, called the effective beam, is the size of the emitter and receiver lens. Since a target is detected by breaking a portion of the beam, the smaller the lens, the smaller the effective beam, and the more accurate the sensor.

Pick the self-contained thru-beam sensor that is right for you

C型(C Frame)

Ideal housing for feeder bowl tracks, part gauging and part detection in tooling and robotic end effectors.

理想的外壳适合用于大型物件检测、不同的物体大小、狭窄空间、双上进料轨道和两轴运动。

Ideal housing for large object detection, varying object size, confined spaces, two-up feed tracks and two axis movements.

可见红光(Visible Red)

激光(Laser)

激光(Laser)

耐用的红外光(Heavy Duty Infraredaser)

最经济型的
Most economical version

对于极度精确的用途（即测量和微小细节检测）
For extreme accuracy application(i.e. gauging and small detail detection)

对极其恶劣的环境
（即切割液、油和碎屑）
For harsh environments
(i.e. cutting fuids, oil, and debris)

在典型的送料导轨的检测系统中使用的光纤。这有点脆弱的系统由一个单独的发射器和接收器和放大器来控制的。必须注意纤维不能损坏或对偏，该发射器和接收器纤维必须再调整，通常需一个另外的特殊定制的支架。
Troublesome Fiber Optics

Here is a typical feed track detection system using fiber optics. This somewhat fragile system consists of a separate emitter and receiver and an amplifer to control them. Care must be taken not to damage or misalign the fibers. The emitter and receiver fibers must be held in alignment, usually with an additional special custom bracket.

           较好地替代光纤
此同样的系统使用teopto容易实现，一体化单元，在此安装，没有多余的校准托架，没有光纤放大器，而且更重要的是没有光纤，teopto的对射光束完全定位成一条直线，并连接在料斗控制器上，即可完成安装。
A Superior Alternative to Fiber OpticHere is the same system using teopto's easy to use, one-piece unit. In this installation, there are no extra alignment brackets, no fiber amplifers, and best of all, no fibers. The teopto thru-beam is simply positioned on the track and
connected to the bowl controller – installation complete

Teopto Thru-beams:
在轨道占用空间小
Take up less space on the track
省略多余的布线
Eliminate extra wiring
消除令人头疼的产品寿命的调整安装
Eliminate adjustment headaches for the life of the stallation。
消除或减少对光纤的依赖。
Eliminate or reduce reliance on fiber optics
侦察微小零件0.06mm以下,
重复精度±0.015mm
Detect small parts down to 0.06 mm with outstanding repeatability Of ±0.015 mm

 5mm

 BGL5A-001-S49

 BGL5A-002-S49

 10mm

 BGL10A-001-S49

 BGL10A-002-S49

 20mm

 BGL20A-001-S49

 BGL20A-002-S49

 30mm

 BGL30A-001-S49

 BGL30A-002-S49

 BGL30A-003-S49 

 BGL30A-004-S49

 50mm

 BGL50A-001-S49

 BGL50A-002-S49

 BGL50A-003-S49

 BGL50A-004-S49

 80mm

 BGL80A-001-S49

 BGL80A-002-S49

 BGL80A-003-S49

 BGL80A-004-S49

 120mmm

 BGL120A-001-S49

 BGL120A-002-S49

 BGL120A-003-S49

 BGL120A-004-S49

 180mm

 BGL180A-001-S49

 BGL180A-002-S49

 220mm

 BGL220A-001-S49

 BGL220A-002-S49

0.3mm(5-30mm models);0.5mm(50-80mm);0.8mm(120-220mm)

0.06mm(30mm models);0.1mm(50mm);0.2mm(80mm);0.3mm(120mm)

0.02mm(5-30mm);0.04m(50mm);
0.06mm(80mm);0.08mm(120-220mm)

0.8mm(all others)

0.2(54×54&68×68);0.3mm(all others)

玻璃透镜glass lens

玻璃透镜glass lens